Your field and financial numbers, finally in one place.
Ingest hooks up your ERP, project management, scheduling and payroll software, lines up every job by job number and cost code, and keeps your WIP schedule and job cost reports current. We host it for you, so there is no IT project.

WIP schedule
As of Oct 31 · example data| Job | % complete | Over / (under) billed | Projected margin |
|---|---|---|---|
| 2207 Riverside Medical Office | 62% | $212K | 11.8% |
| 2214 Harbor Street Garage | 48% | ($341K) | 6.1% |
| 2219 Elm Park Elementary | 81% | $96K | 9.4% |
| 2223 North Shore Lab Fit-out | 35% | $58K | 13.0% |
| 2231 Mill Pond Apartments | 22% | ($127K) | 8.7% |
Which jobs are under billed this month, and by how much?
Two jobs are under billed, $468K in total. Harbor Street Garage is the largest at $341K, mostly concrete work done but not yet on a pay app.
From Viewpoint Vista, Textura, Procore
Every job lives in five systems, and none of them agree
The ERP has the cost. Procore has the change orders. Payroll has the hours. The WIP gets stitched together in Excel.
The WIP schedule is rebuilt by hand
Every month someone pulls cost to date from the ERP, percent complete from the PMs and billings from the pay apps, then ties it out in a spreadsheet. By the time it balances, the month is gone.
Field and office see different jobs
Job numbers, cost codes and vendor names do not match between project management, accounting and payroll, so the same job reads three different ways depending on who you ask.
Margin fade shows up at the job review
Pending change orders, over-budget cost codes and under-billing sit in different places. You find out a job is slipping after it has already slipped.
The reports you already know, built from every system at once
Each one joins your accounting with the field, so the numbers match no matter who pulls them.
Job cost against budget
Job 2214 Harbor Street Garage · example data| Cost code | Revised budget | Committed | Cost to date | Projected over / (under) |
|---|---|---|---|---|
| 01-000 General conditions | $1,240,000 | $1,105,000 | $812,400 | ($22,000) |
| 03-300 Concrete | $2,860,000 | $2,990,500 | $2,214,700 | $184,300 |
| 05-100 Structural steel | $1,915,000 | $1,880,000 | $1,402,900 | ($8,500) |
| 09-200 Drywall | $1,120,000 | $1,064,000 | $402,600 | $12,800 |
| 26-000 Electrical | $2,430,000 | $2,288,000 | $1,066,000 | ($41,200) |
WIP schedule
All active jobs · example data| Job | Contract value | Est. total cost | % complete | Billed to date | Over / (under) |
|---|---|---|---|---|---|
| 2207 Riverside Medical | $18,400,000 | $16,229,000 | 62% | $11,620,000 | $212,000 |
| 2214 Harbor Street Garage | $9,700,000 | $9,108,000 | 48% | $4,315,000 | ($341,000) |
| 2219 Elm Park Elementary | $24,100,000 | $21,835,000 | 81% | $19,617,000 | $96,000 |
| 2223 North Shore Lab | $6,200,000 | $5,394,000 | 35% | $2,228,000 | $58,000 |
Change order log
Open and recent · example data| Job | Change order | Status | Amount | Related RFI |
|---|---|---|---|---|
| 2214 Harbor Street | PCO-018 Footing redesign | Pending | $148,200 | RFI-044 |
| 2214 Harbor Street | PCO-021 Added rebar | Pending | $36,100 | RFI-051 |
| 2207 Riverside Medical | CO-009 Owner upgrade, lobby | Approved | $92,400 | RFI-112 |
| 2231 Mill Pond | PCO-004 Site drainage | In review | $61,750 | RFI-019 |
From the software you run to one set of job numbers
Your ERP, pay apps and project software go in on the left. One set of job numbers your whole team can trust comes out on the right.
1 · Ingest
The tools you already run
2 · Centralize
Everything lands in one place
3 · Consolidate
The tables your team reports on
Viewpoint Vista
Textura
Procore
Viewpoint SpectrumAutodesk Construction Cloud
Ingest Managed, or your own warehouse
job_costViewpoint Vistapay_applicationsTexturachange_eventsProcoreRefreshed on your schedule, with every job matched across systems.
- Job cost against budgetFrom Vista job cost, commitments and change orders in Procore, and labor hours from payroll.
- WIP scheduleFrom Vista, pay apps in Textura or Procore, and the latest estimate for each job.
- Change order logFrom change events and RFIs in Procore, matched to cost and billing in Vista.
Which jobs are under billed this month, and by how much?Then your team asks in plain English, or from Claude or ChatGPT.
What you get
Start with one place for your numbers that we run for you. Add the reports, alerts and help your team needs.
Ingest Managed: we host it for you
One place for every job's numbers, set up and run by us. No warehouse to buy, no servers and no engineers to hire. Already on Snowflake, BigQuery or another warehouse? We land everything there instead.
Integrations for your whole tech stack
Prebuilt for the ERP, project management, scheduling and payroll software contractors run, and built on request for the tools only your trade uses.
Construction report pack
WIP schedule, job cost against budget, over and under billing, change order log, labor against estimate and backlog, built from your own systems and kept current.
Ask about any job
Type a question in plain English and get the answer with the numbers behind it, plus a chart when one helps. No report writer required.
Use it from Claude, ChatGPT or Copilot
Connect the AI assistant your team already uses to your job data, so it answers from your numbers instead of guessing.
Margin fade and billing alerts
Get an email when a job's projected margin drops, a cost code runs over budget or a job falls behind on billing, before the job review.
Job and cost code cleanup
We map job numbers, cost codes, phases and vendors across systems into one standard list, so reports roll up the way your company does.
Your history, not just this month
We bring in past jobs and prior periods when we hook up each system, so you can compare this job to the last ten like it.
Stop keying it twice
Where you want it, we sync records between systems, such as commitments or RFIs, so your team enters them once.
Setup done for you
We do the onboarding: hook up each system, line up your jobs and cost codes, and build your first reports with your controller and PMs.
A data team on call
Need a new report, a new integration or a change to how a number is figured? Our team builds it for you, so you never need to hire one.
Works with the software your jobs run on
These are the systems contractors run most. Do not see yours? We build it.
Project management
Scheduling
Also preconstruction and estimating; field, labor and equipment; safety and risk; payroll and HR; business development and planning; and documents and spreadsheets.
See every integrationAnswers for every seat at the job review
The questions each role asks, answered from the same numbers.
Finance teams
Close faster, with a WIP schedule built from the ERP and the field instead of a spreadsheet.
- Which jobs are over billed or under billed this month, and by how much?
- Where has projected margin faded since last month, and why?
- What is our backlog, and when does it burn?
- Which cost codes are over budget on jobs past 50% complete?
Project teams
See your job's cost, changes and schedule without waiting on accounting.
- Where am I against budget, by cost code?
- Which change orders are still pending, and what is my exposure?
- Which RFIs and submittals are holding up the schedule?
- Are labor hours tracking to the estimate?
Executives
One view of every job, every PM and every market, with the numbers to back it.
- Which jobs are trending below their estimated margin?
- How is each project executive's portfolio performing?
- What does cash look like over the next 13 weeks?
- What is our bid hit rate by market and job size?
Common questions
Do we have to replace our ERP or Procore?
No. Your team keeps working in the software it runs today. Ingest reads from those systems and puts the numbers together.
Do we need a data warehouse or an IT team?
No. With Ingest Managed we host everything for you. If you already have a warehouse such as Snowflake or BigQuery, we can put your data there instead.
What does our team have to do to get started?
Give us read-only access to each system and an hour with your controller and a PM to agree on how jobs, cost codes and percent complete are figured. We do the hooking up and build the first reports.
We use software you do not list. Can you still hook it up?
Yes. If your software has a way to get data out, we build the integration for you, including the tools only your trade uses.
Will Ingest change anything in our systems?
Not unless you ask. Integrations are read-only by default. Syncing records between systems is something we set up only where you want it.
How is our data kept safe?
Each company's data sits in its own store that only your company's access can read. The logins for your systems are kept in a secrets manager, never in code or in reports.
We already have reports in our ERP and Power BI. Why add this?
Keep them. Your ERP reports see accounting and your project reports see the job; Ingest joins both. If you run your own warehouse, your Power BI reports can read the same tables.
See your jobs in one place
Bring a recent WIP schedule and a list of the software you run. We will show you what your numbers look like together.